DIY bracelet made from floss threads. How to make a bracelet out of thread: step-by-step instructions

Instructions

Take floss threads for the bracelet. You should have 4 threads of one color (for example, white) and 4 threads of another color (for example, blue). The length of each thread should be 100 cm.

Thus, on the left you will have a diagonal line directed in one direction, and on the right - in the other. The lines form a corner in the center of the bauble. Tie the central threads in a knot.

Video on the topic

Sources:

• bracelet made of baubles threads in 2018

Bracelet from thread also called a “bauble”, and in the West – a friendship bracelet. The tradition of weaving friendship bracelets originated among the North American Indians. Then it was adopted by hippies and Rastafarians. Today, baubles have become a stylish decoration for which gender, age and status are not an obstacle.

You will need

• 1) Floss threads
• 2) Weaving pattern
• 3) Scissors

Instructions

First, practice weaving the simplest bracelet out of eight thread oblique and straight weaves. Take threads of different colors to quickly understand and remember the essence of weaving.

Before you start braiding, secure the ends thread knot, braid, or make a loop using braid. After the bracelet is ready, process the second end in the same way. The bauble can be made in the form of a fastening strap, as on. This is as your imagination tells you. As you work, secure the end of the bracelet so that it does not twist (it can be pinned to something soft with a tailor's pin).

Start weaving. Even if it seems to you that nothing in the diagram is clear, try it! And you will definitely learn.

Video on the topic

Helpful advice

A bauble can be an unusual gift. When making it for loved ones, put your love into it.

Sources:

• Bauble or friendship bracelet
• weave a bauble from threads

For the first time there was an explosion of fashion bracelets from thread, so called bracelets friendship, occurred back in the days of the hippies. And now, in the new millennium, the relevance of these simple but beautiful jewelry does not fade. Anyone can weave baubles. You just need to sit down and start. And after some time, you will be able to create amazing and complex patterns without much effort. And your friends and family will be happy with such an original gift. And most importantly, things made with your own hands.

You will need

• multi-colored threads, scissors, safety pins

Instructions

First, decide on the color you will use to make it. Their number must be even. Usually they take a meter thread, since the length should be four times the size of the finished one. To start the bracelet neatly, you can make a loop. Fold the threads in half and tie the running thread where the beginning will be. Start braiding the folded threads into knots until you have a loop. Next, start weaving the main pattern. Do not forget that it is very important to maintain a strict sequence of nodes.

In order for the weaving process to be convenient, the threads should be secured, pinned to a hard pillow, sofa, or even to. Arrange the threads in the color sequence that suits you. A simple knot is the main type of weaving. To do this, take the running thread and circle it around the adjacent thread - first draw it down, then up, thread it into the resulting loop and tighten. Alternately tie knots with each thread from left to right. Try to make the knots even. If the thread is twisted and the color you want is not the one you want, there are two options. Either redo the knot or loosen it slightly, and then, holding the vertical thread, pull the other up and away from you. If you run out of thread, thread it to the wrong side of the bracelet so that the thread is not in the way. Take a new thread and attach it to the place where the old one ended. Fold it inside out and tie it with two knots. Turn it inside out and tie a knot from the ends of the new and old thread.

Floss bracelets or so-called baubles became popular back in the 60s thanks to the hippie movement. “Flower children” gave each other homemade jewelry made from natural materials, including thread, as a sign of friendship or love. It is not customary to take off a given bauble until it breaks on its own or until the feelings come to an end. By the way, it’s quite difficult to tear a floss bauble, so these bracelets last a long time.

You will need

• You will need:
• - floss threads;
• - pin.

Instructions

You can even weave it yourself. The pattern is woven with knots tied in different ways and in a certain sequence. To begin with, it’s worth mastering the simplest and most understandable floss. For example, weaving in an oblique way. Take 6 threads of floss approximately 4 times longer than the required length of the finished product (also take into account the reserve for ties). For example, let it be threads of three colors, two of each color. Tie the threads into a knot and secure it to the work surface - for example, pin it to the back of the sofa. Weave the threads into a braid several centimeters long; this will be one of the ties of the future bracelet.

Next, proceed to weaving the bauble itself: arrange the threads on the work surface by color. Take the first thread and tie two knots around the second thread. Similarly, tie the third, fourth, etc. with the first thread. After completing the row, separate the first thread on the left again and begin weaving the second row. Thus, from left to right you will weave row after row, lengthening the bauble. When the bracelet reaches the length you need, braid the threads to make a second tie and tie it with a knot at the end. The bracelet is ready.

Straight weaving is a little more difficult than oblique weaving, so to master it, you will have to show perseverance and patience. But in this way you can make more interesting and complex ones, weave names on them or. You should start weaving such a bracelet in the same way as in the previous case: fasten the threads and braid the braid. Take the first left thread - it will be the leading thread throughout the entire weaving (it is better to make it longer than the rest in advance). Weave the first row with a thread, and then use the same thread to braid the main threads in the opposite direction, forming the second row. Also weave the remaining rows without changing the leading thread.

When you get to the point of weaving the pattern or, instead of braiding the main thread with the leading thread, braid the leading main thread, thereby changing the color of the knot. It is important to knit these knots in the opposite direction so that the leading thread can continue weaving.

Helpful advice

Try to make the knots the same and even, tighten them if necessary.

Sources:

• bracelet from floss pattern

Probably, many who have seen and held beadwork in their hands would like to have them in their home. Of course, the most rational option is to learn how to weave beads yourself. It's not as difficult as it might seem at first glance. At the initial stage, it is enough to learn how to weave only the lightest bracelets available to every beginner.

You will need

• - beads;
• - threads;
• - fishing line;
• - needles;
• - ribbons.

Instructions

To begin, take a fishing line or nylon thread. Please note that if you are dealing with thread, then you will need two needles, which should be located on both edges of the nylon thread. So, prepare nine warp threads. You have to learn how to weave a bracelet - a braid. To do this, you need to make nine blanks. If you do not want to get a bracelet that is too colorful, then you should divide the blanks into three types: three beaded threads of one color, three of another and three of a third.

To begin, you need to create nine bead strands. Let's assume that the future bracelet will feature yellow and green colors. In this case, you need to string yellow beads on three threads, green beads on three and beads on three. At the same time, do not forget to secure the ends of the threads so that the beads do not slip off.

Create nine bead strands. To do this, string small beads one at a time so that the resulting thread is a length equal to 1.5 times the circumference of your wrist. After the blanks are ready, start weaving. To do this, arrange the threads by color, that is, divide the nine threads by three into three parts. Now start weaving a regular braid. This technique is familiar to everyone. Be sure to carefully secure the beginning of the weave, otherwise your bracelet will twist. Once you reach the required length, connect the resulting bracelet, or attach a suitable clasp.

You can weave a more original bracelet using the same technique. To do this, take thick threads or even ribbons. You will need three things. Place the required number of beads on one of them. Do not choose beads that are too small. On the contrary, you will need rather large specimens that resemble pearls or turquoise. Now start braiding the braid so that the side elements go around the bead, creating a frame.

Video on the topic

Helpful advice

For the greatest effect, leather can be used instead of ribbons or threads. Such bracelets are simply unique; any fashionista will envy you if you use simple techniques in combination with modern materials.

Sources:

• How to weave a bracelet with a braid

You will need

• Threads, beads, scissors, button or large bead.

Instructions

Take strong threads and fold it in half several times.

Tie a knot and cut off the excess thread with scissors. As a result, there should be three threads.

Weave a small piece of braid from three threads. Next, start stringing the beads.

Friendship bracelets

Bauble, as an element of modern subculture, does not lose its relevance and does not go out of fashion. On the contrary, new trends and types of baubles are emerging. For a long time now, such a bracelet has ceased to be just a youth hobby, but has become a stylish accessory for fashionistas of all ages. In addition, handmade jewelry will always be original, exclusive and fashionable.

Baubles made of threads

The most convenient material for weaving bracelets and baubles is thread. You can use cotton, wool or floss threads. They are smoother and more convenient for weaving, and it is easy to adjust the knot density with them.

Stylish thread jewelry
Floss bracelets

Pigtail

If you have just begun to master this type of creativity, start by weaving a simple braid to get a feel for the material and the labor-intensive process of work itself.

Simple braid bracelet
Bracelet bracelet with decor

You can weave three identical braids of different colors, and then braid them together. Such a bauble will look not at all simple, but very original.

Straight and oblique weaving

There are main types of weaving baubles - oblique and straight weaving.

As a result of oblique weaving, the design of the bauble is obtained in the form of arrows or Christmas trees.

Bracelets made with oblique weaving
Arrow baubles

Direct weaving provides a greater variety of patterns and greater complexity. With direct weaving you can create different shapes, inscriptions, and designs.

Straight weave bracelet
Bauble “Love is”
Straight weave bracelets with inscriptions

The main element of weaving floss baubles is a knot. The bauble is woven with a double knot in one direction, either from right to left, or vice versa. Having studied the basic components, any technique will be understandable and uncomplicated, and in the future it will allow you to come up with your own personal patterns and designs.

For oblique weaving, usually no more than 4 colors of thread are used. The number of threads can be any, depending on the width of the bracelet. The length of the threads usually does not exceed 1 meter, for any wrist and even taking into account the presence of complex patterns, this will be enough.

Oblique weaving method

For direct weaving, you can take any number of colors, just differentiate the background and the main pattern by color. It is desirable that the colors be contrasting. If the pattern is voluminous, the thread of the pattern should be longer than the rest.

Straight weaving method

Other types of thread baubles

Knowing the basic techniques, you can weave more complex bauble configurations:

• zigzag;

Bauble with a zigzag pattern

• Peruvian wave;

Bauble “Peruvian Wave”

• peacock;

Bauble “Peacock” or “Peacock Tail”

• ladder;

Bracelet made of threads “Ladder”

• lattice.

Floss bracelet “Lattice”

The names themselves speak about the shape of the bracelet. Schemes for such weaving can be easily found on the Internet.

Example of a weaving pattern

At the end of any weaving, the bauble must be finished by tying all the threads in a knot, braiding regular braids on both sides, or sewing on a clasp with your own hands.

Example of a clasp for a thread bracelet

For such a bauble, you can use only two ribbons 2 mm wide. They can be contrasting or in the same color scheme.

Two-color ribbon bracelets

A bracelet made of ribbons can be woven in any way convenient for you: braids, knots or straight weaving. Beads or seed beads are often strung between the knots.

Bauble with beads

And you can make it even more unusual with metal washers that are simply woven into the knot. You can weave a voluminous round bauble from ribbons, which can be worn both on the wrist and on the belt.

Elegant satin ribbon bracelet

There is a type of bauble made of satin ribbons without any weaving. To do this, you can take the tape wider. A beautiful braid or thin lace will also work.

Delicate bracelet

The method is to simply wrap your wrist with tape in one or more layers. The highlight of this accessory is the clasp. It can be a large button, a beautiful button, a decorative pin, a chain or a pendant with a ring on which both ends of the ribbon are secured.

Simple ribbon bracelet

Beaded baubles

Bead weaving for the most diligent needlewomen. Stringing beads onto a fishing line requires care and a lot of time, but the result is excellent.

Bead bracelet
Beaded bracelet with flowers
Bracelet made of beads of different sizes

In general, the weaving technique is not complicated, and once you master it, you can make colorful bracelets with complex patterns and designs.

Baubles made of ropes and leather

A bauble made of leather or leatherette looks more solid and expensive. You can buy leather laces at craft stores or, for a cheaper option, cut up your old bag or gloves into pieces. Even an ordinary leather braid, decorated with metal or wood details, can decorate the most sophisticated look.

Stylish leather bracelet
Bright bracelet made of leather cords

In the same way, bracelets are made from hemp, multi-colored ropes and laces. They look more massive, rougher, but also interesting, unusual and attractive.

Boho style bracelet made of cords

Macrame baubles

The macrame style is more openwork because denser nylon threads are used. Weaving is distinguished by square knots typical of the macrame technique.

Macrame lace bracelet
Macrame bracelet with beads

For one bauble you need four meters of nylon thread. We will also need a ring on which the first knots are tied, and which will serve as decoration for the entire bracelet. Therefore, this element can be as varied as you like - a heart, a stone, a keychain, a pentagram, a square, a triangular, etc.

Adjustable clasp

It is worth noting that the macrame style makes the ideal adjustable clasp for any bauble.

Baubles with decorations

Weaving beautiful baubles is not the limit of imagination, because with your own hands you can decorate your bracelet even more, give it brightness and shockingness. There are two ways to decorate: Bracelet made of cord and beads with ribbon decor

For example, in the first option, you can replace one thread with a rope, a thin chain or a gold thread. Weave beads, beads or nuts. You can place a ring, hook, heart, or any keychain or object that can be caught on both sides in the center of the bauble. Chains with large links braided with threads look very unusual.

In the second case, spikes are attached to an already woven bauble, a chain or rhinestones are threaded through.

Thread necklace

An interesting type of bauble is the friendship necklace. In addition to multi-colored threads, we will need a rope, which we will braid with a regular knot. This is done like this: threads and rope are secured in a convenient way so that they hold well. First, we take a thread of the same color and tie knots, braiding the remaining bundle of threads with a rope. At any time, change the color of the thread and continue weaving. You can add washers, beads, whatever you want to decorate the necklace with. Undoubtedly, it will make a very beautiful necklace.

A friendship necklace will complement your stylish look.

So with your own hands you can make an original thing not only for the wrist. It can also be worn as a hair band or as a belt around the waist. This accessory can be given to friends as a sign of sympathy or friendship.

Stylish DIY accessory

In any creativity, the main thing is not to be afraid to combine colors, textures, patterns. A bauble is a manifestation of your individuality and inner world, a way to fantasize and give yourself and others a good mood.

Necklace braid in sea colors

All kinds of bracelets and baubles made with your own hands are extremely popular these days. Children and teenagers wear them, exchange them, give them to each other and conduct master classes - they show how to make a bracelet from threads and scrap materials. And adults sometimes enjoy decorating themselves with homemade “masterpieces” made at their leisure from a variety of and sometimes the most unexpected materials. Making original accessories has long become a favorite hobby of many needlewomen. This pleasant and creative activity can give a lot of positive emotions, and unique designer jewelry made with your own hands is a legitimate reason to show off your skills and show creativity.

The so-called “friendship bracelet” is a great addition to bright dresses, jeans, and summer sundresses, which are convenient to wear on vacation. This bauble can be given as a gift for Valentine's Day or just as a keepsake. Handmade items are perfect as gifts for friends, children and grandchildren.

Many needlewomen have succeeded so much in their skill and imagination that from a hobby this activity has become a real source of income for them. Handmade jewelry these days is in great demand not only in Russia, but also abroad. Craftswomen sell their products through online stores or through small souvenir shops and boutiques that have appeared everywhere.

How to make a bracelet out of thread - quick guide

Let's try to make the simplest, simplest thread bracelet by tying knots. To work, you will need floss threads of different shades, tape, and scissors. Bracelets made from floss threads are woven very easily and delight the eye with bright colors.

At the beginning of work, we prepare several pieces of threads of selected colors, for example, four. The length of each segment should be 50-60 centimeters. We tie all the threads into a bundle, leaving the ends protruding, secure it with tape or a clip on a pillow or any flat surface, then begin weaving.

Knitting knots

Using one of the threads (the same color as the others, or a contrasting one), we outline the rest, wrapping it around the index finger. Tighten the knot. We repeat such knots the required number of times, for example, we make ten knots. Then select another thread and do the same.

We repeat the procedure with each of the four threads. And our bracelet takes on the appearance of a chain of bright multi-colored knots. If the length of the product is not enough, we return to the first thread and repeat the whole process again. We tie knots to the required number until the bracelet reaches the required length. Ready! We made a bright multi-colored bracelet in a matter of minutes.

Another variant

There is another way to make a bracelet out of thread. It involves the use of auxiliary materials. You will need metal chains, pieces of cord of any color, scissors, superglue, pliers, a pair of carabiner fasteners, and a large needle. All this can be purchased at a sewing accessories store.

At the beginning of the work, we stretch the floss thread through the outermost link of the first chain and tie it in a knot. Using a needle with a large eye, we sew two rows of chains with a bright colored thread, pulling the needle into each link.

We make several rows, depending on the required width. We carefully sew each subsequent row of chains to the previous one. Lubricate the ends of the chains and clamps sewn together with glue, let the glue dry a little. Then we place the clips on the ends of the bracelet and press firmly. Attach a clasp to one clip and a piece of chain to the other. The bracelet is ready!

Crochet

Weaving bracelets from threads and metal chains is also possible using a crochet hook. In this case, in addition to the chain, multi-colored threads and a hook, we will need a clasp (if provided for by the design).

This bracelet is very easy to make. We fasten the thread, tying it at the end of the chain, throw it on the hook and drag it through the outermost link of our chain. Then we tie the edge of the chain with air loops, passing the hook into each link. Having knitted the first row, add another loop, turn the hook and continue the loop with the second row. If you need a wider bracelet, you can make a third one.

The second side of the chain is tied in the same way. If you want your bracelet to fit snugly around your hand, you should attach a clasp to the ends.

These bracelets have a lot of options. With a little imagination, you can figure out how to weave bracelets from threads, loose fluffy yarn, leather laces, soft multi-colored wire, and so on. During the manufacturing process, beads, beads, small stones and buttons can be woven into the product.

We weave macrame

Do you know how to make a bracelet out of thread using the macrame technique? You will need a pillow for weaving or something else you can weave on, 18 beads, a measuring tape, scissors, and a clip.

The bracelet requires minimal knowledge of the macrame technique, namely the ability to tie a single flat knot and a capuchin knot. We calculate the required length of the thread by wrapping it around the wrist and multiplying the resulting length by 5.

Weaving technology

We cut seven threads of the required length, attach them to the pillow with a clip, and distribute them as follows: one thread in the middle and 3 on the right and left. We perform 5 flat knots on the three leftmost threads, and the same on the three right ones. We string a bead onto the middle thread.

From each of the halves we take the thread closest to the center and, connecting them with the middle one, we make 5 of the same flat knots in the same way. We string a bead onto the threads adjacent to the edges. And, again adding 1 thread from the center, we make five knots on the right and left. We repeat the procedure several times.

At the end of the bracelet we string the last bead and secure it with a simple knot. We place the ends of the threads on top of each other, and tie them with another additional thread several times. This creates a fastening fastener. On both sides of the clasp we now have long bunches, in each of them we decorate one of the seven threads with a bead, securing it with a knot at the end.

We connect the remaining threads in pairs with a capuchin knot. Those who do not know how to weave it can also decorate all ends with beads (one or several for each end). Our bracelet is ready!

We looked at just a few ways to make a bracelet out of thread. In fact, there are a great many of them, and the flight of your imagination is unlimited.

Bracelets are a great addition to any look, and there is no need to waste time looking for them. You can make a beautiful and stylish decoration without leaving your home with your own hands. Weaving bracelets from threads is the most common method. Handmade jewelry will always be in fashion, since they are made exclusively according to the author’s idea, only in some cases craftsmen use ready-made weaving patterns. There are a lot of materials from which such accessories are made, and every day new ideas and designs appear. In this article we will tell you in detail how to weave a bracelet from threads, beads, chains and other decorative elements. You will learn about what a bauble is, what methods exist for weaving bracelets from threads and how to decorate this accessory.

Fenechka - what is it?

A bauble is an accessory in the form of a bracelet for a hand, made of intertwined threads, ribbons, beads and other materials. It is created by hand using different methods and weaving patterns. Nowadays you can hardly surprise anyone with ordinary jewelry, but thanks to such bracelets you can catch more than one admiring glance on yourself. Many girls perceive a bracelet made of threads as a beautiful decoration, and sometimes its creation is based on a friendly relationship between two people. It’s so nice to give it as a symbol of friendship and love, or just present it to a loved one!

Most often, such baubles are woven from threads, mainly floss. What color should the threads be - plain or multi-colored? The choice of color depends solely on your idea and flight of fancy:

• You can, for example, weave a bracelet in one color, and when finished, add beads, rhinestones or pendants.
• Such thread products can depict various patterns, drawings and even inscriptions.
• The threads can be formed in such a way that each part of the bracelet has a certain shape: heart, diamond, zigzag or wave.

Important! Do not forget that such jewelry can be worn by both girls and boys. For the men's version, use darker shades of thread and decoration elements, for example, a “shamballa” bracelet using black or wooden beads.

Methods of weaving baubles

Making baubles involves tying four types of knots. Below, we will look at two ways to weave such a decoration - oblique and straight. Using such options, you can create interesting drawings and patterns that will differ not only in complexity, but also in execution technique.

Oblique weaving

Experienced craftsmen advise beginners to start their creative journey by creating bracelets from threads using the oblique weaving method. At first glance, the schemes may seem complicated, but we assure you that this is not so.

The essence of oblique weaving is that the knots are knitted in one direction: from right to left, or vice versa. We will look in detail at the simplest pattern - the classic three-color one, which will perfectly demonstrate the principle of oblique weaving.

To work, you need to prepare the following materials and tools:

• Floss threads in three colors (length at least 60 cm).
• A pad and a pin, clip or tape (to secure the work to the surface).
• Scissors.

So, let's get started:

1. At the first stage, you need to make a knot - the beginning of a bauble made of threads. Using a pin, we attach the threads to the working surface so that they are motionless.
2. In this case, we begin weaving from left to right so as to tie the two outermost threads into a knot and hold the outermost one.
3. After this, we transfer the resulting knot to the base of the thread baubles. Then we make another similar knot.
4. We perform the same manipulations with the remaining threads in the direction to the right. Thus, the outermost thread will tie two knots on the following threads.
5. When the first row is woven, you can begin the next one. It is done in exactly the same way as the first one, but the color of the outer thread will be different.
6. When the bauble reaches the length you need, tie the threads into one knot and trim off the excess with scissors.

That's all, nothing complicated! Now you know how to weave a bracelet from threads.

Important! If you are weaving a bracelet from ribbons, then the ends of the finished decoration can simply be sealed with fire.

Straight weave

This is quite a complex job that requires certain skills. Those who have mastered oblique weaving will find it easier to cope with this too. The advantage of this weaving method is a large selection of different patterns due to the fact that the knots are knitted horizontally.

This weaving moves first from right to left, and then vice versa. For the direct method, you need to learn how to weave a bauble from two colors, where one will be the background and the other will be the knots.

Important! There will be much more of the second color as it will form the design or pattern of the bracelet.

Let's start making the bracelet in a direct way:

• The first step is to create the base of the bauble from threads. To do this, you need to fold the threads in half, which will serve as the background of this bracelet.
• On the one hand, which is closer to the fold, we tie a thread, which will be the leading thread in the entire weaving process.
• We tie all the background threads with this thread so that the result is a beautiful, even loop.

Important! If you run out of thread during the weaving process, do not rush to get upset. The situation can be corrected by tying a new thread of the same color to the wrong side of the bracelet. The resulting knot will be completely invisible to others.

• In the next step, we tie certain knots on the background threads, gradually moving towards the opposite side.
• When the first row is ready, you can move on to the second. Weaving the second row will be carried out according to the same principle of action as in the first case, only in the opposite direction. Experienced craftsmen call this method “snake” or “wave”.

After practicing weaving bracelets using two colors of thread, you can try your skills using more threads or start creating your own personal patterns.

Bracelet made of floss threads with a “heart” pattern

This romantic bracelet goes well with jeans or a bright summer dress.

To make it you need 4 threads of floss - red and blue.

Step-by-step instructions for weaving:

• We lay out each color one by one and tie it with one knot, leaving a tip of about 8 cm for fastening to the surface.
• We fix the material on the board and divide it in two - each half should have 4 threads of different colors. In each part we lay out the threads symmetrically with respect to the opposite half to obtain a mirror image.
• We start weaving on the left with a red thread, thread it through the second and get a knot. We repeat these steps again, since it is necessary to make two knots at once. We continue to weave the red thread around the third and fourth - eventually it will move to the center.

Important! We tighten the red thread well, since we need tight knots to create a solid pattern. Don't forget to do 2 knots in a row - this is very important.

• Now let's move on to the right side - here we do the same work as with the left side, only in reverse - from right to left. If you do everything correctly, the right red thread will move to the center. This will mean that the first row is completed correctly.
• Weave the second row in the same way - move the leading right and leftmost threads to the center.
• Forming hearts. To do this, take the second blue thread and weave it around the leftmost thread, securing it with two knots. We do the same with the second half - we make a binding around the right outer thread.
• Now again we take the left second thread, make knots around the third and fourth so that it is in the middle.
• We perform exactly the same manipulations with the right side - the second red thread.
• With the second thread from the left, we tie two knots around the leftmost thread.
• Now you need to fill the heart with blue thread. To do this, we make knots around the third and fourth threads, heading towards the center of the pattern.

Important! We repeat all the stages one by one in mirror image - first the left side, then the right, and don’t forget about the heart. The drawing will tell you the further course of weaving knots.

• Then we weave the usual two rows - the same as at the very beginning, and then we begin to form the heart. We alternate two methods of weaving until the very end of the bauble.
• When the bracelet fits your wrist, tie all the threads in knots and cut off the excess part.

Infinity bracelet

The execution of such a technique is quite complex, but you can figure it out. Believe me, the result will pleasantly surprise you!

For such a bracelet, we need threads of two colors (the choice of threads and color is at your discretion).

Consider a step-by-step master class:

• The first step is to make 3-4 pieces of each color, about a meter in length.
• We begin weaving from threads of the same color. Take the last left thread and make a knot by placing it on the second thread. We make knots one by one - from left to right. Using this method, we intertwine threads of a different color, but from right to left.
• At the next step, we begin to intertwine strips of two colors. Starting from the middle of the bracelet, weave the left thread into the right side, and the right thread into the left. That is, we tie a series of knots with a thread of one color on threads of a different color, and vice versa.

Important! As a result, there should be a noticeable transition of different thread colors from one side to the other.

• Using the same technology, we continue to weave the bracelet to the desired length.
• We finish the work with a strong knot and cut off the excess threads with scissors.

Important! To decorate such a bracelet, you can use beads that match the color of the product itself or in contrasting shades.

Wish bracelets

This is a rather interesting bracelet, which is woven both to fulfill wishes and to protect against the evil eye. This decoration can be found not only among children, but also among adults. Now it is the most popular.

Important! Weaving protective bracelets began in distant Israel. They believe that such decoration serves as a talisman against evil thoughts and even gives a person strength and good luck in all his endeavors. The Slavs thought that such a bracelet could cure some human diseases. But in India, such a red thread means love for a loved one. Such a protective bracelet of desires occurs in such teachings as Kabbalah.

To make such a bracelet, it is better to take a red wool thread. It’s up to you to decide which hand to wear it on, but there are certain differences in tying the thread on the right or left wrist:

• if you wear a red thread on your left hand, then a person will protect himself from bad influences and thoughts;
• if on the right, it will attract wealth and good luck.

You can weave such decorations in different ways: by intertwining two strands with each other, braiding them with a pigtail, and other ways.

Important! Protective bracelets can be decorated with a variety of elements: a clover leaf, a blue eye against the evil eye, a Jewish anchovy and other pendants.

How to weave a bracelet from threads and beads?

Weaving such a decoration is quite simple, so even a novice needlewoman can handle it. As a result, we will get a stylish bracelet with a chain inside. Interesting? Then let's begin!

For work we prepare:

• Green and pink threads (length 1 meter).
• Safety pin.

Let's start weaving the decoration:

• We fold the threads in half together and secure them with a knot so that a loop is formed at the fold. We thread the knot into the pin and begin to weave the bracelet.

Important! Please note that there should be two main threads in the center, and working threads along the edges. During weaving, the main threads must be pulled tightly.

• After this, we tighten two knots of green threads, then we bring them to the center so that the main threads turn green.
• We make the same 2 knots in pink, and then change the base thread again, but this time to pink. After these six pairs of knots there should be three more green threads.
• We string a bead onto the main threads, and then tie three more green knots.

Important! We repeat this until the required length of the decoration is formed.

• We divide the threads into two parts, braid them, tie them into a knot, and cut off all excess.

Thread bracelet - pattern with chain

Do you want an incredibly fashionable piece of jewelry? Then combining threads with a chain is your option. Such an original decoration will become a real highlight of your look. Stay with us and you will learn how to weave a thread bracelet with your own hands.

For work take:

• Two sets of pink and green floss (15 threads each).
• Wide chain.
• Hair bobby pins.

Important! The threads should be about 4 times the length of your chain.

Let's start working:

1. We tie both parts together into a knot. We put bobby pins on each bunch to easily pull the threads through the links of the chain.
2. We pull the pink bunch through the first link from below. In the same way, only on top, we apply a green bunch and also thread it through the first link. This weaving is reminiscent of weaving a regular braid of hair.
3. We carry out similar manipulations with the remaining links of the chain. We alternate the parts until the chain ends.
4. When finished, secure the ends with a tight knot.

Important! In this case, we intertwined the lower part of the chain; if desired, the other edge can be processed.

How to decorate bracelets?

A bracelet made of bright threads is certainly beautiful, but this does not mean that it cannot be complemented with various jewelry.

Let's take a closer look at how you can add a beautiful woven bracelet:

• Locks are the simplest option for decorating baubles.
• Various pendants can be attached to a thread using a connecting ring: hearts, a lighthouse, letters, an infinity sign and much more.
• Rhinestones can be glued to a finished bracelet using Moment glue or a glue gun, or you can buy thread with ready-made rhinestones.
• Beads or beads will perfectly decorate any slightly boring bracelet. They are easy to string on a thread or simply sew in a ready-made accessory.

Now you know how to weave a thread bracelet with your own hands. There is nothing complicated here! From such a simple and affordable material you can give life to a new designer accessory. It’s so interesting when every summer look has its own stylish, homemade decoration. Always be on top, because you deserve it!

A handcrafted gift will always touch everyone's heart. Hand made products have nothing in common with serial factory production and it is believed that they have a soul of their own. In Soviet times, creativity was given a not very honorable place as a cute hobby. The flourishing of industry and the factory-made similarity of goods were considered the norm, which dulled imagination and the desire of a person to create things, household items and decorations by hand. Over time, excellent taste, the desire to express oneself, and the desire to own exclusive items won out. This is how handmade art came back into fashion, breathing new life into many forgotten types of applied art. Weaving is considered one of the oldest creative movements. Using the applied method it is easy to create original accessories, jewelry, household items and even clothing. Therefore, the question of how to weave baubles is invariably relevant for modern followers.

The origins of ancient art

In most countries of the world, baubles are known under the name “friendship-bracelets”; translated, the name means “friendship bracelets”. Traditional weaving of baubles goes back centuries. The birth of this unusual accessory was given to the North American Indians; their life activity was invariably accompanied by mysticism and magical rituals.

Native American man wearing traditional headdress

Initially, bracelets and belts woven from plant fibers, leather cords, straw, and other materials had a sacred meaning. Jewelry protected owners from evil spirits, hatred, and the envy of enemies. In addition to their cult meaning, things could wordlessly tell about a person’s belonging to a certain class, the main purpose in the tribe.

Information was provided by everything from colors, patterns to weaving material. Since ancient times, there has been a tradition of giving baubles made with one’s own hand as a sign of deep affection and friendship. With the help of simple accessories, peace was established between two people, family clans, and entire tribes.

They wore the bauble until it tore on its own. If a person dared to remove a gift, it was considered a bad sign, a signal of the end of a friendly alliance.

Later, the tradition of exchanging friendship bracelets among North American tribes was adopted by followers of the hippie culture. Ardent opponents of any manifestations of wealth and deliberate luxury, they valued the generous gifts of nature to humanity.

Hippies revived the tradition of weaving baubles

Hippies were the first to revive the tradition of expressing secret feelings with the help of hand-woven baubles. At the wedding ceremony, “flower children” exchanged not rings made of precious metals, but simple baubles as a sign of eternal love.

The same pattern shows that the young people are a couple

As a rule, weaving was done in red and white colors as evidence of free views on love. The same pattern showed that the young people were a couple. Gradually, the deep sacred meaning of jewelry was lost, but the popularity of baubles around the world is not slowing down.

Baubles will complement any modern look

Thanks to the free Internet space, and our website in particular, it is easy to learn at any time how to weave baubles from various types of threads, beads, and satin ribbons.

Weaving bracelets from thin threads is painstaking work. But even a child can cope with the task successfully and fall in love with an interesting activity, having learned the secrets of how to weave baubles. In the modern world, art is popular for any age category. Not only girls, but also guys of any age become fans of creating handmade jewelry. Some tips from experienced weavers:

• When starting a labor-intensive but exciting task, you should choose a convenient place and take a comfortable position to work on your first masterpiece.
• Beginning craftsmen should take care of a working surface for weaving. This could be a tablet from a stationery store with a clip, a pillow, or a board upholstered in fabric.

A stationery tablet is ideal for weaving baubles

• The choice of material is an important factor in the quality, aesthetics and neatness of the product. We choose durable threads, with a smooth surface, evenly colored along the entire length. If the thread is “unruly” and fluffs up during the weaving process, this disrupts the aesthetics of the accessories and can “hide” a beautiful textured pattern. It is worth paying attention to the reputation of manufacturers, giving preference to the most conscientious of them. Experienced masters in the art of weaving advise choosing floss threads for baubles that meet the required standards, surprising with their bright colors.

Floss is the perfect choice

• To ensure that the baubles do not lose their original shape, it is necessary to tie the knots in the pattern elements more tightly. It is important to strictly follow the schemes, which will become faithful assistants in your work.
• Color spectrum. The sacred meaning of baubles has been forgotten, but not completely lost. If you are creating a bracelet that has a deeper meaning than just a simple decoration, you should wisely choose the theme of the pattern and color combination. For example, blue is the color of friendship, pale green tells about dashed hopes, white is a shade of purity, faith in ideals, and pink is a dream, energy, love.

Bauble in ethnic style

Advice:

If you decide to become a real fenkoweaver, you should get a “magic chest”. Organization of work and preparation is the most important stage in any needlework. Materials, tools, sketches of future masterpieces should be stored in one place.

You can use an empty shoe box for this. Floss is a delicate material and requires a reverent attitude. For storage, you can make or buy a special container; this prevents the thread from tangling and fading.

Homemade machine from a box for weaving baubles

Methods of weaving baubles

It is impossible to answer unequivocally how to weave baubles from threads, beads or ribbons. The first thing beginners need to do is learn how to knit simple knots and learn to understand patterns. The main classification distinguishes two main methods: baubles are woven in an oblique or direct way. Thanks to detailed master classes, beginners will learn to weave original jewelry in a short period of time, feeling like fish in water in the ancient art.

The process of weaving baubles on a tablet

The simplest pattern for a beginner

Experienced fenco weavers skillfully weave entire collections of original jewelry, turning their favorite hobby into a profitable business. Beginners should not rush, they need to start small. By mastering science gradually, you can achieve the highest level of mastery. The most common and simple way to weave a friendship braid is a “pigtail” pattern, made of three classic parts. For this, any number of threads is used, but always a multiple of three.

Pigtail pattern, made of three classic parts

You can complicate the work by adding a fourth thread. The algorithm is as follows:

• We fix the threads on the working surface; you can tie them together with a simple knot.
• Let's start weaving. Of the two central parts, the left component is superimposed on the right. It, in turn, is superimposed on the left side.
• There are two extreme parts in the center. We repeat the algorithm until we get a weave of the required length.

Four-strand bauble

The simplest method requires using an even number of components. A little practice, and the “braid” will appear in the hands of a master with lightning speed. Having learned to braid a braid in four threads, you can complicate the work, using more and more parts; confident masters reach fourteen.

Bauble braid of four strands

This weaving can be used not only to create bracelets. An original memorable gift for a friend, relative or loved one will be a bookmark for a book or notepad, a keychain for a phone, a purse or keys.

Oblique weaving method

One of the simplest techniques, understandable to a beginner, is oblique weaving.

Bauble made with oblique weaving

Work algorithm:

1. We select twelve pieces of thread and sort them by color. To get a harmonious combination of shades, we lay out threads of the same shades in a mirror image: red on the sides, then two orange ones, and so on. We continue to lay out the mirrors, sorting them by color, aiming for the center.

Important!

For the oblique weaving method, the length of each thread is at least 1 meter. Please note that the desired length of the bauble will be reduced by four.

1. We tie the bundle with a strong knot located eight centimeters from the edge of the threads.
2. We begin the process, starting from the leftmost part. We add it with the adjacent component so that a “four” is formed. We pass the first thread through the resulting window and tighten the knot. Let's repeat the maneuver. We perform similar actions with the outer threads, but on the other side.
3. You need to braid the pattern in such a way that the colors on the inside are located on the outside. We complete the first row by tying the outermost components of the weave together in two knots.
4. We repeat the rows as many times as possible until we get the desired length of weaving.

Bauble with oblique weaving, master class

At the end of the work, we tie the threads together into a tight knot, so the weaving will not fall apart while wearing the accessory. It is important to follow the order in which the elements are performed in the first few rows; then they will naturally fit in the correct sequence.

Bauble - oblique weaving

As a result, we will get a textured pattern. By the way, if you made a mistake with the order of the thread and tied a knot where it doesn’t belong, you can carefully unravel it using a sewing needle or tailor’s pin, tying it correctly.

It is believed that this method is more complex than the previous one. The ability to create bracelets from straight weave threads indicates a high level of skill. You can weave all sorts of patterns, phrases or names into this decoration. Before learning how to weave baubles using the direct method, it is important to master simpler techniques and learn how to work with several colors at the same time.

Straight weave bauble

To create a unique patterned bracelet, you need to follow the step-by-step master class:

• Select strands of thread of different colors. It is important to conditionally separate the parts to create the background of the product, as well as separately for the pattern or inscription. If you plan to make the pattern large, choose a strand for it that is longer than the rest, because the picture is formed only from it.
• Let us conditionally designate the extreme thread on the left and call it leading. We tie it around all the remaining thread strands.
• At the moment when the main part reaches the opposite edge, we will continue working in the same way, but in the mirror direction. It turns out that the thread moves in a zigzag pattern, changing direction.
• Creating a pattern or inscription on a bracelet begins with interlacing the main thread and the one intended for the design.

The work of creating a bauble in a direct way is difficult and requires care. The craftsman will be more than rewarded for his painstaking work with a designer bauble with a beautiful pattern or an exclusive inscription.

Bauble with name

Name bracelets are a classic gift for a friend. Such a gift is symbolic; without words it can express the depth and sincerity of feelings for a loved one. To make such a bauble, you can use threads of several shades, but even from two colors you can weave a beautiful memorable product.

Baubles with various inscriptions

A few tips to help you with your work:

1. A bracelet with a name can be woven from either thread or beads strung on a fishing line.
2. The diagram of the direct method is taken as a basis; a stencil can be used for a harmonious and uniform arrangement of letters.
3. Calculate the width of the bracelet correctly. The size of the letters should be slightly smaller than the width of the product.

Bauble with name

You can make a stencil for the inscription yourself. The weaving pattern of the future bracelet is applied to the paper, and the optimal distance between the letters is calculated in order to beautifully and evenly place the entire inscription.

When the thread runs out

Making bracelets from threads, ribbons, cords, and beads is an ancient art. Success depends on many factors, including desire, imagination and talent of the master. In order for a product to meet the highest requirements of quality, strength, and aesthetics, you need to know a few secrets. One of the main ones is the ability to quietly tie a thread. There are often cases when the craftsman fails to correctly calculate the length of the thread, and sometimes it can break during the knitting process. Don't despair, everything can be fixed. We do this:

1. We push the thread that has run out or broken under the wrong side of the product, leaving enough length for the fastening knot.
2. We substitute a component of the same color to the place where the gap occurred, but from the wrong side.
3. We tie it with two classic knots. From the inside out we will tie the thread that was re-introduced into the work with the one that ended.

What to do if the thread runs out

Such a simple maneuver will help you continue working; the place where the two threads are fastened will be hidden on the wrong side, without disturbing the external aesthetics of the weave.

Master classes on original bracelets

The synthesis of textures, materials and varieties of pattern combinations creates an extraordinary effect, which is important when making original gizmos. Hand made is valued because each craft is unique in nature.

Each craft is unique

Having an original sample, you can be sure of its exclusivity. Even if the methods and techniques of creation are similar, engaging in a favorite hobby encourages imagination and bold experiments. Craftswomen and fans of applied art have creative thinking and are in a tireless search for new forms, ideas and design solutions.

Baubles in ethno style

Combining incompatible techniques, materials, they give birth to style and beauty. This is the only way the evolution of creativity occurs, generously gifting us with the luxurious results of the work of talented craftsmen. We offer several ideas for stylish crafts that you can create yourself.

Elegant bauble with rhinestones

Baubles decorated with rhinestones

For this lesson you will need rhinestones, nylon threads, and a sharp sewing needle. We do everything step by step:

1. We knit a bracelet using any convenient method - oblique or straight.
2. We sew the base with stitches in the middle or on the sides. When making a stitch, we string rhinestones, beads or beads so that they are located on the front side.

Important!

When weaving decor, sparkling rhinestones, colored beads, beads or spikes into the pattern, we do not break the threads, but push them apart with an awl or needle so as not to tear or disturb the delicate structure.

1. If the level of skill allows, we string the decor onto a fishing line or thread directly during production.

Decorated bracelets

It is important to ensure that the arrangement of the decor is uniform. To do this, you can prepare a visual diagram on paper in advance.

Chains are a constant trend, a stylish accessory for an everyday look. Using a chain, you can create luxurious collections or simply update a thread bauble.

Bright bauble on a chain

• Let's take a ready-made base, woven using any method. We measure out a chain of similar length.
• We pass the thread through the needle at the beginning of the warp, tying its end with the inserted thread.
• Carefully pushing the knots apart with a needle, tightly sew the chain along the edge.
• We make stitches similar to the distance between the links.
• We sew to the end of the base, secure it tightly, tying it with a double knot.

At the end of the lesson, we’ll cut off the remaining threads and enjoy the beauty of the new elegant decoration in our designer collection. Your imagination, as well as ready-made ideas, will tell you how to decorate this or that result of painstaking work.

We use the macrame technique

Creativity is an unknown world, full of imagination, experiments and new ideas. Mastery in needlework is determined by the extent to which a master can combine several techniques to create an original masterpiece.

Bauble made using macrame technique

Macrame is an ancient technique known since ancient times. In addition to useful flowerpots, textured panels, tablecloths or curtains, you can create elegant decorations using unusual techniques.

Necklace made using macrame technique

For a special chic, you can use any metal pendant, beads, beads and any other decor as a basis. Before you start knitting, you need to briefly familiarize yourself with the known methods of knitting macrame knots. The main assistants in creating a masterpiece will be a square, flat or double-sided knot. Experienced macrame masters recommend practicing tying knots, bringing the movements to automaticity, and only after that begin implementing a creative project. We will need a roll of nylon cord, a metal pendant in the form of a ring or an infinity sign, scissors and a thin needle. Let's do it step by step:

• We cut the nylon cord into several components: two sections of 17 centimeters each, two more of 50 centimeters, one – 25 centimeters.
• We bend a half-meter section, stretch the resulting loop into the pendant, tightening it with the other end. We perform similar actions with the second segment.
• Take a piece 75 cm long, fold it in half, placing its center on the cord that is already tied to the pendant.
• We turn the right component to the left, and the left one, in turn, is placed on top of the right one, “diving” into the loop from top to bottom.
• We tighten the tight knot, repeating the same maneuver, but in a mirror image. We weave the combination alternately, in the left and right directions, to the desired bracelet size.

How to weave macrame baubles

Bauble with a macrame knot

You can finish the lesson here by tightly tying the ends of the cord. To make it easier to put on the product, we will tie the clasp separately. We tie a piece 25 centimeters long, bend it in half, and again knit knots left and right. With the cords in the center we can adjust the girth on the wrist, easily removing it.

Extravagant motives

Style is created in the details. Fashionable accessories, original details - all this creates a unique image. Exclusive “things” add to fashionistas not only luxury, original elegance, but also self-confidence. The skillful use of the most ordinary materials in the hands of a talented needlewoman can turn into an extravagant decoration.

Various baubles

We offer a master class on creating a fancy accessory from ordinary hex nuts and cotton rope. Manufacturing algorithm:

• From the skein we measure three segments of the same length, retreating five centimeters, and tie the ends together into a tight knot.
• We start weaving in the form of an ordinary braid. Having completed several simple elements, we begin to thread the cords into the hexagons one by one.
• Before braiding the left strand, we thread the thread through the nut, press it tightly, and wrap the strand. We repeat similarly with the right side.

Important!

No matter how thick the threads or cords are, the weaving should be tight. This way the bauble will hold its shape, and the decorative element woven into the pattern will not dangle freely, thereby wearing out the base.

• We repeat the steps, accurately calculating the distance between the elements, distributing the hexagons evenly.
• We finish the braiding again with a braid, tie knots at the ends and attach a metal clasp.

How to make a bracelet with spikes

An extravagant bauble with hex nuts will decorate not only a woman’s look, but will also become a stylish accessory for a man.

Bauble - a symbol of friendship

Having learned the art, you can create not only bracelets, but also belts, beautiful necklaces or necklaces.

We offer an interesting master class on “friendship necklaces”. To work, you will need a skein of light cotton rope, scissors, and several shades of floss. For decoration we will use metal nuts and washers. To make the weaving process easier, you will need empty spools for winding. We begin to weave a two-color necklace, choosing red and lilac shades. Once you get used to the work, you can use more shades. Let's start the process:

• Choose two colors of floss and wind the threads onto spools. We tie the ends of the threads and the main rope with a strong knot. The length of the working components is impressive, so the end of the future product can be secured with a pin on the sofa or tape on the table surface.
• We begin to braid the main red thread, the lilac component remains in the left hand. We make sure that the rope that will become the base is taut all the time.
• We start a red strand by folding the loop directly above the base rope, while the reel “dives” into the loop in the “bottom-up” direction. Pull the coil exactly to the right, then up, carefully tightening the element into a knot. We repeat the algorithm until we decide to change the color of the weaving.
• Next, we transfer the spool of red thread to the left hand, and take the spool with the new color to the right. We continue the similar repetition of elements, but with a different shade.

Thread necklaces

The decor, as a rule, is woven in during the work process, but after the process is completed, it can be hung or sewn onto the finished product. A necklace or belt looks subtle, stylish, and original. The more colors and tiers you weave, the more interesting the effect will be.

Simple beaded bauble

Beads are one of the oldest types of decorative jewelry. Antique togas, outfits of Egyptian pharaohs and medieval kings were decorated with a scattering of small beads. From a simple-looking material, in the skillful hands of a fenkoweaver, truly masterpiece products are born, decorating any image.

Beaded bauble with floral motif

Small beads with a hole are pliable to work with, which is why beading is most often used in creating baubles. Before you weave, you should learn how to draw up patterns. They can be very different, from the simplest variations to complex intricacies of patterns. We present the easiest way to weave a bauble and pattern diagrams:

• we collect several beads on the fishing line;
• we secure the element by threading the end of the fishing line into the previous bead;
• we string the next bead, again threading the line into the beads of the previous row.

How to weave beaded baubles - a simple lesson

This is the simplest way to weave and secure beads. All that remains is to choose a suitable drawing scheme and turn the drawing into a beautiful reality. Another master class on weaving a bracelet from threads and beads:

1. We choose a strong and bright thread 1.2 meters long, a set of beads, prepare scissors, a sewing needle and a small button for the fastener.
2. We divide the thread into two components 50 and 70 centimeters long. We fold the longer piece in half and attach a shorter piece to it, folding the ends of all the components together. We tie it so that we get a loop, two 35 centimeter cuts come out of it, and one tip is shorter.
3. The loop should remain such that the button fastener “sits” tightly on it, as if poured in, and then cut off the remaining tip.
4. From the three components, we will begin to weave a classic “braid”, continuing the pattern about three centimeters long.
5. We begin to string beads alternately on the left and then on the right strand, continuing to braid the “braid”.

Advice:

It is important to braid the pattern tightly, adjusting the position of the beads so that they “look” in one direction. Then the work looks symmetrical and neat.

1. Having finished weaving with beads, we finish the bracelet with a standard braid. We secure the weaving with a strong knot.
2. We make a clasp from a button. We put it on the ends of the threads, tie a knot, cut off all excess. When putting the bracelet on your hand, we fasten the button into a loop.

How to weave a beaded bauble

When the work reaches the point of automatism, patterns will begin to appear on their own, because creativity undividedly exists with imagination. Beaded baubles sparkling with a noble shine will be a luxurious addition to a business woman’s outfit, a light romantic sundress or an elegant evening dress for a social event.

Exclusive handmade bracelets

Bright, touchingly tender, original and stylish baubles are not just decoration, but a real symbol of friendship, a way to wordlessly express sincerity and depth of feelings. Bold experiments and the desire to create an exclusive masterpiece will help a beginner decide on the choice of materials, draw up a weaving pattern, and surprise the creative world with a new design solution.

Bright bracelets will perfectly complement your boho style look.

There is a belief that such bracelets are not sold, but are only given to people dear to the heart. Many fenkoweavers believe that such a decoration can fulfill any cherished desire, you just need to think about it carefully while working. There are many ways to weave baubles. Feel free to use ready-made master classes to teach a new art, because in the future your ideas will help beginners.